|
|
Focus tester Collimator Lens tester
|
 |
Focus tester
FD-30N |
|
- Electronic collimator of 800 mm.
- Easy-to-use. Measures a gap of focal plane for standard lens
|
|
|
Focus tester
FD-800AD4K |
|
- Electronic collimator of 800 mm.
- Easy-to-use. Measures a gap of focal plane for standard lens
- Has a horizontal type
|
|
|
|
|
|
Focus tester
FD-150AD4 |
|
- Electronic collimator of 150 mm.
- Easy-to-use. Measures a gap of focal plane for standard lens
|
|
|
Focus tester
FD-30VCK |
|
- Electronic collimator of 300 mm.
- Focus adjustment while watching an electronic scale
- Digital display
|
|
|
|
|
|
Focus tester
FDH-300 |
|
- Electronic collimator of 300 mm.
- Collimator lens scan measurement
- Measures a focal point of a lens
|
|
|
Focus tester
FDH-500 |
|
- Electronic collimator of 500 mm.
- Collimator lens scan measurement
- Measures focal point of a lens
|
|
|
|
|
|
Focus tester
AFD-50 |
|
- Measures AF performance of a camera
- High precision measurement is possible in the amount of lens changes by AF at a collimator.
- The maximum output of the focus position of a lens is detected.
|
|
|
Focus tester
AFGC-1 |
|
- Chart transfer system using collimator
- It can use a small chart monitor by a collimator lens.
- Adjusts focal point of DSC.
- Setting is possible at infinity, also finite distance
- Supports TELE/WIDE
|
|
|
|
|
|
Focus tester
AF-102 |
|
- Measures movement distance of non-contact lens
- Measures the amount of gaps by un-contacting.
|
|
|
Focus tester
FD-50AD6K |
|
- Electronic collimator of 500 mm.
- Measures a gap of focal plane for standard lens/Easy-to -use
|
|
|
|
|
|
FNo. tester
SMD-81/SMD-100 |
|
- Measures apertures of interchangeable lens for single-lens reflex camera
- Measures apertures of wide and long focus
- Sensitivity change: With 2 lines
- Supports production line of interchangeable lens
- Using achromat&Large caliber
|
|
|
F.No tester
SMD-60 |
|
- F.No tester
- An iris diaphragm of a large caliber can be measured.
- Includes a judgment function of each range
- Many functions and Low price
- Has separate type
|
|
|
|
|
|
Aperture bound tester
KO-400 |
|
- Lens iris diaphragm dynamic characteristics automatic measurement for single lens reflex cameras
- All iris diaphragm angle is set up and it is automatic measurement about dynamic characteristics.
- It is logarithmic transformation about moving time of an iris diaphragm, and change of the iris diaphragm quantity of light.
- It changes into the wave of 1 [EV]/Div, and is made graph
- A setup for standard, and control a display of a measurement wave by PC.
|
|
|
Aperture Bound tester
KO-300 |
|
- Measures a diaphragm operating time and an error of a diaphragm.
Time until it goes into the range of the iris diaphragm specified from the trigger (ms),
And the iris diaphragm error (ΔEV) of the specified time (time to be stabilized) is analyzed,
A digital display is carried out.
Drive a diaphragm from the outside.(optional)
Measurement with various postures is possible.
|
|
|
|
|
|
Vignetting factor Measurement Systemr
KK-2T |
|
- Measures by "Relative focal plane illuminance" measuring method of JIS standard No.JISB 70996-4-2.
- Measures quantity of light omissions of lens focal plane automatically and handles data by PC.
|
|
|
Vignetting factor Measurement System
KK-2 |
|
- It can measure easily for small lens camera, large lens camera and rear projector
- Measures by "Relative focal plane illuminance" measuring method of JIS standard No.JISB 70996-4-2.
- A large sized lens -a small lens can be measured.
- By rotating a large field light source, measurement became possible about the property of a projector lens.
|
|
|
|
|
|
Camera light metering distribution System
MMD-1 |
|
- Light metering distribution measurement
- The standard incident angle quantity of light is irradiated to a test camera, and each partial photometry value is made into the table of 3-dimensional measurement.
|
|
|
Flare ratio & Vignetting factor Measurement System
LFM-1 |
|
- Measurement of Flare retio & Vignetting Factor
- Using Φ 1,000mm Integral sphere
- Measurement Flare retio of Lens
|
|
|
|
|
|
LCD chart system
LCS-1 |
|
- Target chart for AF measurement
- Various resolution chart
- A setup is freely possible line size, line width, and contrast
- Displays immediately by switch change.
- Includes a function to memorize the test contents
- High contrast by a dedicated monitor
- Luminance stabilizing by circuit standard
|
|
|
Viewer (Light Source)
VLB-2 |
|
- Large-format A2 size viewer
- Long life and stability by Cold Cathode Fluorescent Lamp.No flickering by high frequency lighting(40KHz)
|
|
|
|
|
|
Viewer (Light Source)
VLB-3 |
|
- Large-format A3 size viewer
- Long life and stability by Cold Cathode Fluorescent Lamp.No flickering by high frequency lighting(40KHz)
- The light source(Back light) for A3 size transmission type chart
|
|
|
Viewer (Light Source)
VLB-4 |
|
- A4 size viewer
- Long life and stability by Cold Cathode Fluorescent Lamp.No flickering by high frequency lighting(40KHz)
- The light source(Back light) for A4 size transmission type chart
|
|
|
|
|
|
Viewer (Light Source)
VLB-155 |
|
- A5 size viewer
- The power supply unit for five pieces
- 150x120mm Transparent type Light Source for lighting.
- Chart for the circumferences easy movement
|
|
|
Density tester
AGA-100 |
|
- Measures a change of the density of a gradation filter for exposure compensation
- For digital camera and camera phone
|
|
|
|
|
|
Viewer (Light Source)
VLB-4W |
|
- Two color-temperature changes
5100K/3100K
Long-life of 20,000 hours
Flickerless type by stable high frequency lighting
|
|
|
| |
|
|
|
