| Specifications |
| Measurement Subject |
Lens containing an iris diaphragm
|
| Measuring item |
| Refer to measurement chart |
| T1(ms) |
Time until bound reaches a fiducial point from an external trigger |
| T2(ms) |
Time until bound settles down from an external trigger |
| ΔEV(FNo. eroor) |
FNo. error after T3ms (stable point) since external trigger |
| FNo. indication |
Indicates standard FNo. of FNo. error(ΔEV)
Has MANUAL and AUTO mode |
|
| Measurement chart |
 |
Measurement
and
indication range |
| * Indication method |
4 ch digital,7 segment indication |
| * T1 ch |
0.02-99.9ms |
| * T2 ch |
0.02-99.9ms(resolving power 25µs) |
| * ΔEV ch |
±2.99EV(resolving power 0.01EV) |
| * FNo. ch |
F1.4--32,&-0.5EV |
| * T3 setting range |
1-99ms,Digital 2fig. indications |
| * Bound tolerance level |
0-+0.99EV,0-0.99EV
Digital 2fig. indications |
| * FNo. setting range |
F1.4--32 2times ,Passing
With a switch(-0.5EV shift) |
| * Measuring aperture range |
Φ75.0-0.5(m/m) |
|
| Mesuring accuracy |
T1,T2 :±50µs
ΔEV :±0.05EV |
| Trigger input signal |
TTL, trigger signal or synchronous(MAKE) signalTTL, trigger signal or synchronous(MAKE) signal |
Calibration
method |
One calibration of fixed gauge(aperture) |
| WAVE OUT |
Wave Form
(ΔEV:0.00EV → about 1.25V,MAX → 12V) |
| DATA OUT |
Centronics
Mean, Max, Min (continuous data and five data) |
| Environment for use |
Temperature 5ºC-45ºCHumidity below 85% |
| Power supply |
AC100V±10%,50/60 Hz
(AC115,220V With a tap) |
| Power consumption |
about 50VA |
Dimensions&
Weight |
[ Main unit ] about 8.0 Kgs
250(W)x210(H)x350(D)mm
[ Detector unit ] about 10.0 Kgs
240(W)x710(H)x200(D)mm |
