top page >> Products >> Fluorescent tube CFL tester
>> Dark starting tester for Cold Cathode Fluorescent Lamp CFU-200
  



  Dark starting tester for Cold Cathode Fluorescent Lamp  CFU-200

* Maximum 200pcs CFL can be set ,then Dark starting automatic testing
* Unnecessary darkroom
* Automatically, good or NG is portioned out.Automatically  inspects after a time setup.
* All are possible with data processing at PC

SPECIFICATIONS
Inspection Number It is 2mm pipe(Diameter)and is 200 pieces.[4mm pipe 100pieces]
The Length of a Measurement Pipe 200mm-1500mm(Only straight pipe)
The Path of a Measurement Pipe 1.8mm-8mm The path of the present pipe(mmΦ): 1.8,2.0,2.2,2.4,2.6,3,4,(8)
Dark Reserve Time 0.1-99.9 hours * It sets up with a digital switch.
Lighting Time Measurement 0.01ms-99999.9ms
Dark Lighting 0-1.4Lux * Lighting by white LED [1 pieces are inspected]
Inverter Power Supply 0-32V,3A(Digital voltage display)
Lighting Detection Position The position of about 100mm from the fixation side of a pipe.
Inverter The floating system paid&Usually,inverter connection is possible.
Control Part Personal computer(Desktop), 15 inch liquid crystal display monitor&With a cart
General view Main unit:W=2400mm H=1300mm D=850mm,300Kg