|
 |
|
|
 |
| * |
HSP-40 detect optically the wire action time & flight distance amount of printing of a Dot Impact Head.By a quick response sensor, accurately can perform memory of the wave of the quantity of light change, wave analysis, and data processing .A setup of a parameter, a setup of drive conditions, measurement, and a stage are controlled by a personal computer.
|
|
|
| Specifications |
| Sensor |
SPD photo acceptance unit |
| Measurement slit |
0.05(W)x2.00(H)mm |
| Measurement accuracy |
Less than 5% |
| Speed of response |
200KHz |
| Measurement display |
Personal Computer |
| The max time which can be waveform taken in |
250ms |
| Magnifying glass |
The visual check of a hammer pin |
| Power Source |
AC100V,50/60Hz |
| Power consumption |
About 400VA(except drive power supply) |
| Measurement environment |
Temperature 5ºC-40ºC,Humidity 70% or less |
| The number of times of operation , and an item |
The average value, the maximum, the minimum value, and standard deviation in the arbitrary number of times of measurement (1 - 999 times).
|
| The stage for measurement positioning |
X,Z stage is automatic control(Resolution:X=2µm,Z=1µm)
[GAP stop accuracy of position]Less than 5µm
|
| Weight & Dimensions |
[Detection part] 950(W)x349(H)x290(D)mm,About 45.0kg
[p/hDriver] 360(W)x300(H)x420(D)mm,About 13.5kg
[Drive unit] 250(W)x120(H)x320(D)mm,About 3.5kg
|
|
|
| Impact force measurement unit |
| Operation number of times and items |
The average, the maximum, the minimum value, and standard deviation in the arbitrary number of times of measurement (1 - 100 times) |
| Measuring accuracy |
The accuracy of an impact force sensor [GAP stop accuracy of position] Less than 5 micrometers |
| Dimensions&Weight |
[Detector·Maesurement unit] 400(W)x200(H)x130(D)mm,about 29.0kg |
|
|
|
|
|
|
|
