日本語
中文
Catalog
Contact
Catalog
TEL:042-646-1127

UV Exposure Device– UVL-3

  • Exposed printing by photolithography
  • Desktop type
  • Color LCD and a keypad are equipped
  • Accurate control of irradiating time

【Using instructions】

  1. Power ON, and turn on lights
  2. After stabilize lighting, adjust and input an irradiance
  3. Set an exposure time (Display an exposure amount by irradiance x time)
  4. Exposure

Automatic open/close shutter at time exposure mode

Open/close shutter with looking at exposure amount at manual-operated mode

 

Bookmark

Model UVL-3
Light source Extra-high pressure mercury lamp
Intensity [mW/㎠] Common use: 20-22
Maximum: 24
Illuminance plane (WxH) [mm] Irradiance range: φ155mm
Active: φ113mm
Illuminance unevenness [± %] 8.0 at an active surface
Display / Operation The main operation
External communication control
Power-supply voltage AC100V 50/60Hz
Power consumption [VA] 450
Operating environment Temperature: 5-35 [℃]
Humidity: less than 80 [%] without dew condensation
Dimensions (WxHxD) [mm] 422.5mm(W)×781mm(H)×357mm(D) excluding protrusions
Weight [kg] 30
Extension 【Options】
Change the irradiance (change to less than 20)
Respond to an exposure mask (Add a mask holder and a sample trey)
【Customizations】
Change a sample size (also needs to customize for the irradiance range)
 Inquiry about this product

Related product

  1. Ultra Violet Exposure Equipment– LUV-1000

  2. High Color Rendering Tube LED Illumination–TSLS series

  3. Fiber Optical Light Source — FLS series